|
|||||||||||||||||||||||
|
Early conversion engine mounts seem to be causing some concern. This image is from a Sinclair Motorsport conversion (Now known as Essex Autosport) – the quality looks pretty shocking but failure of this particular one was probably caused by… . . . → Read More: Honda Conversion Engine mount failures Electric car firm Tesla Motors, which has now delivered over a thousand li-ion powered, Lotus Elise based, $100k Roadster sportscars, has had a successful IPO. The company’s stock, after a slight initial dip, climbed by 40 per cent … . . . → Read More: Successful Tesla IPO Aluminium corrosion on the floors of the S1 is a known problem and the fixes are pretty simple. Under the rubber mats, if damp, a nasty chemical soup can build up leading to crevice corrosion. It is less well known… . . . → Read More: Lotus Elise S1 Seat mount corrosion issues Has SELOC (South East Lotus Owners Club) become some sort of odd swingers club? SELOC Regional meets always had a dubious reputation but this is perhaps going a bit too far.
… . . . → Read More: SELOC – Swingers club? The reasons for the recent changes at Essex Autosport nee Sinclaire Motorsport have become apparent. Both directors – Gill Sweeting and Wayne Sweeting have been disqualified as unfit to be the director of a limited company. Gill Sweeting banned for… . . . → Read More: Sinclaire Motorsport / Essex Autosport – Directors disqualified As of midday 21st April the Sinclaire website has been pulled down with a holding site placed in situ with the following statement: “essex autosport – Public Statement. Welcome to essex autosport! Run by Wayne and… . . . → Read More: Essex Autsport / Sinclaire Motorsport – website pulled down Things are progressing. Peter Grace of PEC Racing is putting together the engine for me and has almost finished it. A few mods have been made – gearbox crank seal and restriction of oil to head as I’m not using… . . . → Read More: Steve Butts 1.4k series compound charged k series – update My car has the engine in situ, with it’s manifold made and all tooling made for the mounts, manifold and adapter set up. I have the cooling/injection and management system ready to bolt on. I still have to design my… . . . → Read More: Mark Bideleux Elise DIY Duratec kit update |
||||||||||||||||||||||
|
Copyright © 2010 elise-r - All Rights Reserved |
|||||||||||||||||||||||
